Ferrocene Appended Porphyrin-Based Bipolar Electrode Material for High-Performance Energy Storage.

The versatile properties of bipolar organic electrode materials have attracted considerable attention in the field of electrochemical energy storage (EES). However, their practical application is hindered by their inherent limitations including low intrinsic electrical conductivity, low specific capacity, and high solubility. Herein, a bipolar organic molecule combining both porphyrin and ferrocene moieties (CuDEFcP) [5,15-bis(ethynyl)-10,20-di ferrocenyl porphinato]copper(II)) has been developed. It is proposed as a new organic electrode material with multifunctional application for rechargeable organic lithium-based batteries (ROLBs) and dual-ion organic symmetric batteries (SDIBs). Superior performance was delivered as cathode material in lithium based dual-ion batteries (LDIBs), with a high initial discharge capacity of 300 mAh. g-1 at 0.2 A. g-1 and a reversible capacity of 58 mAh. g-1 after 5000 cycles at 1 A. g-1 . However, employing it as an anode material in lithium-ion batteries (LIBs), a reversible capacity of 295 mAh. g-1 at 0.2 A. g-1 was delivered. In SDIBs, in which CuDEFcP is used as both anode and cathode, an average discharge voltage of 2.4 V and an energy density of 261 Wh.kg-1 were achieved.

Donor-Acceptor-Appended Triarylboron Lewis Acids: Ratiometric or Time-Resolved Turn-On Fluorescence Response toward Fluoride Binding.

Triarylboron Lewis acid compounds (CzmBoT (1c) and DPAmBoT (2c)), in which carbazole (Cz) or diphenylamine (DPA) donors are linked with a triazine acceptor in the ortho position of the phenylene ring are prepared and characterized. The treatment of 1c and 2c with the fluoride anion produces the corresponding fluoride adducts [1cF]- and [2cF]- as a tetraethylammonium salt. An X-ray diffraction study of [1cF]- reveals a twisted conformation between the Cz and phenylene rings. The Cz-containing 1c shows a ratiometric fluorescence change upon fluoride binding, while the DPA-containing 2c exhibits a turn-on fluorescence response in tetrahydrofuran. In particular, both fluoride adducts exhibit thermally activated delayed fluorescence (TADF) properties with microsecond-range lifetimes. Electrochemical and theoretical analysis suggests that the intramolecular charge-transfer transition from the donor to a conjugated acceptor fragment is switched to the donor to a triazine transition after fluoride binding. Theoretical analysis further demonstrates the twisted structure, effective highest occupied molecular orbital-lowest unoccupied molecular orbital separation, and the small energy splitting between the excited singlet and triplet states for the fluoride adducts, with all supporting the observed TADF. The time-resolved fluorescence measurements of 2c in the presence of both fluoride and a competitive fluorescent dye (Coumarin 6) effectively eliminate the short-lived fluorescence of a dye, retaining long-lived fluorescence signals originating only from [2cF]-.

Time Transient Electrochemical Monitoring of Tetraalkylammonium Polybromide Solid Particle Formation: Observation of Ionic Liquid-to-Solid Transitions.

Energy storage systems (ESSs) using a Br-/Br2 redox reaction such as a Zn/Br redox flow battery (RFB) or a redox-enhanced electrochemical capacitor (Redox-EC) suffer from self-discharge reactions resulting in significant Coulombic loss. To inhibit the self-discharge, quaternary ammonium (Q+) and tetraalkylammonium (T+) bromide are added to form ionic liquid (QBr2 n+1) and solid (TBr3) polybromides during the ESS charging process. The electrochemical formation of liquid QBr2 n+1 and its electrochemical properties have been examined. The detailed mechanisms of ionic solid TBr3 formation, however, have not yet been explored. In this article, we analyzed the ionic liquid-to-solid phase transition of TBr3 particles using a time transient electrochemical method. We suggest the formation of ionic solid TBr3 particles via hydrated TBr3 droplets as an intermediate phase, which are generated by electro-oxidation of Br- in an aqueous TBr solution. We found the phase transition time of TBr3 particles is strongly dependent on the chemical structure of T+ and the concentration of TBr in an aqueous solution.

Rational design of time-resolved turn-on fluorescence sensors: exploiting delayed fluorescence for hydrogen peroxide sensing.

Weakly emissive phosphine compounds, which contain a carbazolyl donor-triarylboryl acceptor luminophore, become strongly delayed fluorescent upon changes to their oxide forms. Time-gated acquisition of the fluorescence signals of phosphine in the presence of H2O2 and a competitive fluorescence dye allow for detection of H2O2 with elimination of short-lived fluorescence noise.

Nido-Carboranes: Donors for Thermally Activated Delayed Fluorescence.

An approach to the design of nido-carborane-based luminescent compounds that can exhibit thermally activated delayed fluorescence (TADF) is proposed. 7,8-Dicarba-nido-undecaboranes (nido-carboranes) having various 8-R groups (R=H, Me, i-Pr, Ph) are appended to the meta or para position of the phenyl ring of the dimesitylphenylborane (PhBMes2 ) acceptor, forming donor-acceptor compounds (nido-m1-m4 and nido-p1-p4). The bulky 8-R group and meta substitution of the nido-carborane are essential to attain a highly twisted arrangement between the donor and acceptor moieties, leading to a very small energy splitting between the singlet and triplet excited states (ΔEST <0.05 eV for nido-m2, -m3, and -p3). These compounds exhibit efficient TADF with microsecond-range lifetimes. In particular, nido-m2 and -m3 display aggregation-induced emission (AIE) with TADF properties.

Separation/purification of ethylene from an acetylene/ethylene mixture in a pillared-layer porous metal-organic framework.

Here we report the synthesis, structure and porous properties of a 3D pillared-layer porous framework of Mn(ii)-Mn(iii), {[Mn3(bipy)3(H2O)4][Mn(CN)6]2·2(bipy)·4H2O}n (1). The guest-removed framework (1a) shows significant uptake of C2H2, whereas it excludes the other two C2 hydrocarbons (C2H4 and C2H6). Furthermore, excellent separation proficiency for C2H2 from a mixture of C2H2 and C2H4 (1 : 99, v/v) is realized in a breakthrough column experiment under ambient conditions.

Does the Mechanism of the Garratt-Braverman Cyclization Differ with Substrates? A Computational Study on Bispropargyl Sulfones, Sulfides, Ethers, Amines, and Methanes.

We studied the variation in mechanism among different bispropargyl substrates-sulfone, sulfide, ether, amine, and methane-toward Garratt-Braverman (GB) cyclization using density functional theory calculations. Isomerization and cycloaddition are the key steps in the GB cyclization. To compare the reactivity among the various substrates, we computed the free energy of activation (ΔG(⧧)) for the cycloaddition and the cyclization steps, whereas we used the theoretically computed pKa values for the isomerization steps. Our results suggest that the sulfones undergo a relatively fast isomerization followed by slower cyclization, while the ethers undergo a slow isomerization followed by easy cyclization. The methanes and amines are similar to the ethers, and the sulfides showed intermediate behavior. We extended our study to unsymmetrical substrates and compare the results with experiments that suggest the isomerization to be the rate-limiting step for bispropargyl ethers, while cyclization through a diradical intermediate is crucial to the rate for the bispropargyl sulfones. On the basis of these findings, we made predictions on the selectivity of unsymmetrical bispropargyl sulfones, amines, methanes, and sulfides. This is the first detailed mechanistic study on the GB cyclization of bispropargyl substrates other than sulfones.

Shifting the Reactivity of Bis-propargyl Ethers from Garratt-Braverman Cyclization Mode to 1,5-H Shift Pathway To Yield 3,4-Disubstituted Furans: A Combined Experimental and Computational Study.

Aryl or vinyl substituted bis-propargyl ethers upon base treatment generally form phthalans via the Garratt-Braverman (GB) cyclization pathway. In a major departure from this usual route, several aryl/vinyl bis-propargyl ethers with one of the acetylenic arms ending up with 2-tetrahydropyranyloxy methyl or ethoxy methyl have been shown to follow the alternative intramolecular 1,5-H shift pathway upon base treatment. The reaction has led to the formation of synthetically as well as biologically important 3,4-disubstituted furan derivatives in good yields. The initially formed E isomer in solution (CDCl3) slowly isomerizes to the Z isomer, indicating greater stability of the latter. The factors affecting the interplay between the 1,5-H shift and GB rearrangement have also been evaluated, and the results are supported by DFT-based computational study.

Effect of π-π interaction in Bergman cyclisation.

The role of π-π interactions in controlling the reactivity and selectivity of a chemical reaction is only recently being explored, even though their ubiquitous role in the structural aspects is well known. We have studied Bergman cyclisation focusing on the effect of π-π interactions on the activation barrier and the variation of π-π interactions along the reaction coordinate. We used enediyne substrates that contain phenyl groups connected to the reaction centres (C1 and C6 atoms), separated by 0, 1 and 2 linker groups. The main difference between the substrates is that the Ph groups enjoy different flexibility to accommodate the changes occurring during the progress of the reaction. The path length of the minimum energy path is increased - shortest in the least flexible substrate (a) and longer in the more flexible ones (c, d and e). We calculated the interaction between the Ph groups, the π-π interaction, using BP86-D3BJ, B3LYP-D3BJ, M06-2X, B2PLYP-D3BJ, SCS-MP2, and SAPT. The BP86-D3BJ was found to be sufficiently accurate with a mean absolute deviation of 0.26 kcal mol(-1) with respect to the SAPT2+3 values. The variation in the π-π interaction shows different behaviour in a-e, and this can be correlated with the flexibility of the Ph groups to orient themselves to maintain the optimal relative orientation while conforming to the changes in the reaction coordinate. We analysed the relative orientation of the phenyl groups using certain geometric parameters that showed that when Ph groups can attain a relative orientation close to that of the free dimer, the interaction is maximum. Energy decomposition analysis using SAPT showed that the dispersive interaction is the major contributor (50-60%) to the attractive forces. The π-π interactions influenced the overall activation energy, either by destabilising the substrates or by stabilising the TS - resulting in a variation of about 3.5 kcal mol(-1) in activation energies in a-e. The effect of substituents of different electronic nature was assessed which showed that electron donating and electron withdrawing substituents increase the π-π interactions; however, the TS is more stabilised and hence activation energies are increased.

Cooperativity in bimetallic glutathione complexes.

Glutathione interacting with Au(+), Ag(+), and [HgMe](+) metal ions is investigated using density functional theory. An extensive conformational search shows that the sulfhydryl group of cysteine is the predominant binding motif for Au(+), Ag(+), and [HgMe](+). The order of binding affinities and binding free energies for the metal:ligand complexes are calculated at the B3LYP-D3(BJ)/def2-TZVP level of theory. Analysis of the gas-phase optimized structures has shown that the increase in the number of metal ions (1:1 → 2:1) during the complex formation with a single glutathione leads to a strong cooperative behavior. Conversely, anti-cooperativity is demonstrated in implicit solvation corrections as well as in explicit solvent corrections to the energies in the explicitly solvated-phase structures optimized using a density-based adaptive QM/MM methodology.

Colorimetric and fluorimetric response of Schiff base molecules towards fluoride anion, solution test kit fabrication, logical interpretations and DFT-D3 study.

Two newly synthesized Schiff base molecules are herein reported as anion sensors. -NO2 substituted receptor (P1) is comparatively more acidic and can sense F(-), OAc(-) and H2PO4(-), whereas -CN substituted receptor (P2) is less acidic and is selective for F(-) only. Reversible UV-Vis response for both receptors with F(-) can mimic multiple logic gate functions, and several complex electronic circuits based on XNOR, XOR, OR, AND, NOT and NOR logic operations with 'Write-Read-Erase-Read' options have been executed. Interesting 'turn on and off' fluorescence responses were noticed for the receptors with F(-). Intracellular F(-) detection as a diagnosis of non-skeletal fluorosis was successful using a fluorescence microscope with Candida albicans (prokaryotic cell, a diploid fungus) and pollen grains of Tecoma stans (eukaryotic cell) incubated in 10(-6) M fluoride-contaminated hand-pump water collected from Bankura, West Bengal, India. Furthermore, a solution test kit was fabricated for easy and selective detection of F(-) in an aqueous solvent.

A Rationally Designed Thymidine-Based Self-Assembled Monolayer on a Gold Electrode for Electroanalytical Applications.

A self-assembled monolayer (SAM) of 1-(3,5-epidithio-2,3,5-trideoxy-ß-D-threo-pentofuranosyl)thymine (EFT) on a gold electrode was prepared and characterized by Raman spectral and electrochemical measurements. Voltammetric and electrochemical impedance measurements show that the SAM of EFT on a Au electrode impedes the electron-transfer reaction. The SAM of EFT was successfully used for the voltammetric sensing of urate in neutral solution. The coexisting ascorbate anion does not interfere and therefore the EFT-based electrode was able to quantify urate at the micromolar level in the presence of a large excess amount of ascorbate. To demonstrate the practical applications, the amount of urate in two different human serum samples was quantified by using the EFT-based electrode; the results are in good agreement with those determined by the clinical method. DFT calculations show that both ascorbate and urate have noncovalent interactions including hydrogen-bonding interactions with EFT.

Asymmetric Garratt-Braverman cyclization: a route to axially chiral aryl naphthalene-amino acid hybrids.

We report the first example of a highly diastereoselective Garratt-Braverman cyclization leading to the synthesis of chiral aryl naphthalene-amino acid hybrids in excellent yields. The stereogenecity in the amino acid has induced high diastereoselectivity for the reaction. Computations based on density functional theory indicated a lower activation free energy barrier for the M isomer as compared to that for the P diastereomer (ΔΔG = 3.48 kcal/mol). Comparison of the recorded CD spectrum of the product with the calculated one also supported the preferential formation of the M diastereomer.